Calibration Tips

AeroPower-12S is factory calibrated but if you want to fine-tune, follow the instructions below

  • For voltage: Use a multimeter at the battery terminals and adjust calibration parameters like BATT_VOLT_MULT (ArduPilot) or BAT1_V_DIV (PX4).

  • For current: Use a known resistive load or current clamp to measure and fine-tune BATT_AMP_PERVOLT (ArduPilot) or BAT1_A_PER_V (PX4).

Always verify telemetry readings before live operation or flight.

PreviousPX4 SetupNextAeroBuck-5