> For the complete documentation index, see [llms.txt](https://teravolt.gitbook.io/teravolt/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://teravolt.gitbook.io/teravolt/power/aeropower-12s.md).

# AeroPower-12s

- [Introduction](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/introduction.md)
- [Features](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/features.md)
- [Specifications](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/specifications.md)
- [Pinout](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/pinout.md)
- [Supported Autopilots](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/supported-autopilots.md)
- [Setup & Configuration](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/setup-and-configuration.md)
- [Address Table](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/setup-and-configuration/address-table.md): Up-to 4 Different AeroPower12s Modules can be used on one system on the same i2C Bus
- [Ardupilot](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/setup-and-configuration/ardupilot.md)
- [PX4 Setup](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/setup-and-configuration/px4-setup.md)
- [Calibration Tips](https://teravolt.gitbook.io/teravolt/power/aeropower-12s/setup-and-configuration/calibration-tips.md): AeroPower-12s is factory calibrated but if you want to fine-tune, follow the instructions below