Resetting the Module

1. Soft Reboot (Apply Settings)

Navigate to the AeroTel-24 Dashboard using a standard web browser. The address depends on your current operating mode:

1. Access Point Mode (Default): Enter http://192.168.1.1 in the address bar.

2. Station Mode (Client): Enter the IP address assigned to the module by your router. If you configured a Static IP in the Advanced Wi-Fi Settings, use that address instead

2. Factory Reset (Physical Button)

If you have forgotten your password, misconfigured the device, or cannot access the Web UI, use the physical BOOT button on the module to restore factory defaults.

1. Ensure the AeroTel-24 module is powered on.

2. Locate the BOOT button on the side of the device.

1. Long Press the Boot button for 5 seconds or three Mississippi.

2. The device will reboot with the default settings:

   • SSID: AeroTel-24 v2

   • Password: aerotel24

   • IP Address: 192.168.1.1

   • Mode: Wi-Fi access Point