> For the complete documentation index, see [llms.txt](https://teravolt.gitbook.io/teravolt/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://teravolt.gitbook.io/teravolt/strobes/strobeit/features.md).

# Features

<figure><img src="/files/3emyvtz2gy8IrIz4vRIw" alt="StrobeitT Front"><figcaption><p>StrobeiT Front</p></figcaption></figure>

* RGB Output (3 W)

  Full-spectrum strobe output with brightness up to 800 mA at 5 V
* Hall Sensor Color Switching

  Tap a magnet near the board to instantly cycle LED colors
* State-Aware PWM Control

  ArduPilot Lua scripting or RC PWM channel selects visual modes
* RC Receiver Friendly

  Plug directly into a PWM output from your receiver for plug-and-fly setup
* Simple 3-Pin Interface

  GND, 5 V, and SIGNAL make wiring easy
* Fully Customizable Logic

  Open-source Lua script to adapt behavior for any use case
* Mount-Anywhere Form Factor

  20 mm circular PCB with dual M3 mounting holes