Pinout

The output is provided via a JST-GH 1.25mm 4-Pin Connector.

JST-GH 1.25 4-PIN

Pin #	Label	Function
1	VOUT	+24V Output
2	VOUT	+24V Output
3	GND	Ground
4	GND	Ground

Note: The dual VOUT and GND pins are internally bridged to distribute the high current load (5A) effectively through the connector.

Solder pads

Pad Name	Function
VIN	Positive DC input (12–60V)
GND	Input Ground
VOUT	Regulated 12V Output
GND (OUT)	Ground for Output

⚠️ Note: Always connect input and output grounds to system ground for stable operation.

Note: Dual pins for VOUT and GND are used to distribute the high current load (5A) effectively through the connector.